Electric Vehicle Cooling Fluid Car Coolant for Automobile Engine Radiator

• Customization: Available
• After-sales Service: 1year
• Type: Antifreeze
• Model NO.: EV
• Form: Liquid
• Component: Antifreeze
• The Mother Liquor: Glycol
• Capacity: 500 - 1000ml
• Storage: Moisture-Proof
• Viscosity Grade: 0
• Brand: Huaqing
• Colour: Red
• Condition: Liquid
• Transport Package: Wooden
• Specification: (H)140X(W)410X(D)315 MM
• Trademark: huaqing
• Origin: China

Product Description

Product Introduction

Motor vehicle antifreeze coolant series is made of polyester grade ethylene glycol, non-ionic inhibitor and low temperature viscosity improver.The freezing point of this product can be customised, the freezing point range is -60ºC~-20ºC; the use temperature range is -55ºC~120ºC.This product is pre-diluted coolant. It can be used directly. It is suitable for the cooling system of electric vehicle power battery, motor, electronic control and power exchange station.
-Excellent safety performance, effectively preventing the danger of electric leakage caused by accidental leakage;
-Excellent thermal conductivity, excellent metal corrosion protection performance;
-Excellent environmental performance, does not contain nitrite, nitrate, borate and other inorganic salts;
-Replacement cycle of 2 years or 100,000 km (whichever comes first);
-Meet the requirements of EU RoHS and REACH regulations.

Project			HQ-EV	Test method
Appearance			No precipitation or suspended matter, clear and transparent liquid	Visual estimation
Color			Colourless or red	Visual estimation
Density(20.0ºC)/(g/cm3)			1.075	SH/T 0068
Freezing point/ºC			-36.2	SH/T 0090
Boiling point/ºC			107.2	SH/T 0089
pH value			8.6	SH/T 0069
Chlorine content/(mg/kg)			1	SH/T 0621
Electrical conductivity (25°C)/(μS/cm)			76	GB/T 6682
The impact on automotive organic coatings			No impact	SH/T 0084
Corrosion of glassware (88ºC±2ºC, 336h±2h)	Change in mass (mg/Test piece)	Purple copper	1.2	SH/T 0085
		Brass	1.5
		Steel	1.0
		ZL101A Cast aluminum	1.6
		3003aluminum	1.2
		4043aluminum	2.1
		6063aluminum	1.0
Bubble tendency (70ºC±1ºC)	Foam volume/ml		40	SH/T 0066
	Foam disappearance time/s		1.0

 

 

Main Product

 

Company Profile

Hefei Huaqing High Tech Surface Technology Co., Ltd. is located in Hefei National High-Tech Industrial Development Zone, covering a total area of 560 acres. It specializes in new materials for surface treatment, new materials for new energy liquid cooling, aerospace parts processing, electronic plating processing, and functionalized equipment for surface treatment.
The company has undertaken 7 national scientific research projects, obtained 79 national invention patents, hosted and participated in the formulation of 16 national standards and industry standards, has 29 proprietary technologies, and has won 3 national, provincial and municipal awards for scientific and technological progress.

Company Advantage

Persist in innovation and win-win cooperation 
The Liquid Cooling Division of Huaqing is dedicated to the industrialization of new liquid cooling materials, committed to providing customers with or customizing various high-performance and environmentally friendly coolants, heat transfer fluids and liquid cooling technology solutions. Through continuous cooperation and technological innovation, it promotes the commercial application of various high-performance and environmentally friendly coolants that can meet the needs of new energy vehicles, energy storage, wind power, data centers and other fields. And we sincerely cooperate with upstream and downstream enterprises for win-win results, jointly creating a clean and sustainable future. 
Productivity is far ahead 
The Huaqing New Material Production Center has 12 coolant production lines,6 fully automatic surface treatment production lines and 2 coating production lines, with an annual production capacity of 200,000 tons. The center uses environmentally friendly raw materials and advanced technologies. The various new types of environmentally friendly products it produces eliminate environmental pollution from the source and truly achieve clean production. It plays a promoting role in the sustainable development and industrial upgrading of the surface treatment and liquid cooling related industries.
Superior geographical location 
The Huaqing Hefei Surface Treatment Base is planned to cover an area of 560 mu and is equipped with a wastewater treatment center with a daily sewage treatment capacity of 10,000 cubic meters. The base will develop into a" high-tech park, ecological park, cultural park and economic park", and can provide high-level engineering technical support and supporting services for surface treatment and liquid-cooled new materials in East China and even the whole country. 
Form strong alliances with many universities 
The Huaqing Hefei Surface Treatment Base is planned to cover an area of 560 mu and is equipped with a wastewater treatment center with a daily sewage treatment capacity of 10,000 cubic meters.The base will develop into a" high-tech park,ecological park, cultural park and economic park", and can provide high-level engineering technical support and supporting services for surface treatment and liquid-cooled new materials in East China and even the whole country.

 

Our Certificate

Exhibition

Packaging & Shipping

FAQ

Q1: What types of antifreeze are available and for which scenarios?
A: Organic Acid Type (OAT) and Inorganic Salt Type (IAT) are available for petrol, diesel, electric vehicles and industrial equipment cooling systems.  
Q2: What is the main ingredient of antifreeze and is it environmentally friendly?
A: This product adopts ethylene glycol/propylene glycol based formula with high efficient corrosion inhibitor and antioxidant, which complies with RoHS, REACH environmental protection standards and is non-toxic and harmless.
Q3: What international certifications have the products passed?
A: Certifications include: ISO9001, ISO14001, ISO45001
Q4: What are the packaging specifications and do you support customization?
A: Standard specification: 25L/200L/1000L drum, support LOGO printing, leak-proof packaging customization, accept OEM/ODM service.
Q5: What is your terms of delivery?
A: FOB,EXW.
Q6: What is your terms of payment?
A: We support T/T and L/C payments. T/T payment requires a 30% deposit when placing an order and 70% of the final payment before shipping.
Q7:  How long does it take from order to delivery?
A: Bulk orders 15-30 days (depending on order quantity).